FAQ's
Can you use a water-based paint over an oil base finish?
In a word, yes. However, you will need to either sand the surface to a dull finish or apply a coat of primer. You will now be safe to paint with a latex paint. The thought is 'dull finish.' This gives the paint a surface to which to bond.
How often should you have to paint the interior?
Many factors can contribute to that.
- The quality of the paint used is of the utmost importance.
- The amount of traffic through a particular area.
- Whether or not there are smokers in the home.
- Is there a fireplace that is used on a regular basis during the winter months, and does the damper work properly?
- How many children and their ages?
There are too many factors to take into consideration, and each home can be different. However a good quality job done by a professional crew under normal conditions should last anywhere from 6-10 years. Call us and we will be happy to evaluate your particular situation and offer you a more precise answer.
What kind of surface preparation is done?
All holes are filled and sanded. All cracks are properly scraped out, filled and sanded. Caulking is inspected around all windows and frames, doors and door frames and re-caulked as needed. Crown molding, chair rail etc. are all caulked and properly prepared. All nail pops are repaired and sanded. Any water stains, crayon marks etc. are sealed before painting and grease and heavy dirt accumulations are cleaned. Any mildew that is present will be removed prior to painting.
How long should I wait before cleaning my windows after painting?
We always recommend waiting two weeks before allowing any cleaning agents to come in contact with the new paint. Paint dries in a matter of a few hours but all paint goes through a curing process which takes longer.
On what surfaces can Crown Moldings be mounted?
Crown Moldings can be mounted on (new or painted) drywall, plaster, or plywood surfaces.
How do I fix a run in the paint?
If the paint is dry, the only way to fix it is to sand the paint run off and repaint it. Use caution to avoid ruining the texture or sanding too far down.
Which is better a brush or a roller?
Use a roller as much as possible. It will put down a more even and smooth finish than a brush.